Product Information

Powerful Bass, without losing space.

Pioneer launches another product in its generation of Class-D amplified subwoofers integrating DIGITAL BASS CONTROL. This unique feature generates two selectable Bass Modes: DEEP and DYNAMIC, producing 160 Watts of strong, rich, deep bass that you can feel, without giving up space. Users can easily control and customise the two bass modes directly from the supplied wired remote control, and you can easily mount the TS-WX130DA under the front seats or in the boot.

Thanks to the inclusion of Class-D technology, Pioneer’s TS-WX130DA is even easier to install, as it is capable of taking both High (Speaker Line Input) and Low (RCA Line Input) input signals, meaning you can connect it to your aftermarket or original factory fitted stereo, to easily upgrade the sound you have now.

TS-WX130DA is a small active subwoofer in a sealed enclosure, delivering 160 W Maximum power and 50 W Nominal Power.

Specification

• Size 20 cm
• Maximum power    160 W
• Nominal input power    50 W
• Frequency response    DEEP Bass Mode: 20 - 200 Hz 
• DYNAMIC Bass Mode: 40 - 160
• Sensitivity    DEEP Bass Mode: 95 dB 
• DYNAMIC Bass Mode: 100 dB
• Woofer material    Aluminium
• Voice Coil type    Copper Round Wire 4-Layer
• Voice Coil bobbin type    Glass Imide
• Lowest resonance frequency    32 Hz
• Magnets    Strontium
• Weight    3.5 kg
• Dimensions (W x H x D)    280 x 200 x 70

What's Included

• Powered subwoofer
• 10.5" RCA input harness (4-pin Molex plug/2 female RCAs)
• Power harness with 16.5' power and remote turn-on leads and 6' ground wire (3-pin Molex plug)
• 10A ATO fuse in fuse holder (installed on power wire)
• Wired Digital Bass Control with attached 16.25' cable (RJ-45 plug)
• 2 Mounting feet
• Cable clamp
• 2 Self-tapping screws (M5 x 18mm)
• 2 Machine screws (M5 x 14mm)
• 2 Machine screws (M3 x 8mm)
• Adhesive backed hook-and-loop pad
• Instruction Manual