Morel MPS 4.400 Amp 4 Channel 4x70w Class A B Car Stereo Amplifier 400w RMS
morel car audio specialist in the UK

Morel MPS 4.400 Amp 4 Channel 4x70w Class A B Car Stereo Amplifier 400w RMS

Morel MPS 4.400

4-channel car amplifier — 70 watts RMS x 4

2-year-warranty

£0.00
£399.99
IN STOCK
CENMPS4400

Order in the next and choose express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

View / leave a review

There are no reviews for this product.

Product Information

Old school power

Morel built this MPS 4.400 amplifier so their high-performing car speakers would have an amp worthy enough to power them, giving you high-fidelity musical reproduction along with pure, clean power. The MPS 4.400 can send 70 watts RMS to each of your front and rear speakers, boosting musical clarity and emotional impact. You can also set this amplifier to 2-channel mode and power a couple of subs with up to 200 watts RMS each.

Low-noise design

Morel made sure that every detail of this amplifier's design would result in lower noise and higher sound quality. The amp's Class AB architecture achieves the cleanest signal with the least distortion, while balanced differential inputs reject interference. An onboard microprocessor controls the thermal management system, keeping the amp running cool and steady no matter how hard it's driven. All the connections are on one side of the amp to keep wiring neat, organized, and simple for the installer.

Tone controls for every occasion

The high- and low-pass filters and gain controls sit protected under a top panel. Their intuitive operations and functions make it easy to match the amp's output to your speakers or subs — and achieve great sound. This amplifier's modest exterior shelters high-quality electronic components that guarantee an accurate and musical performance.

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Class AB amp technology
  • 100 dB signal-to-noise ratio, 0.05% distortion
  • variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • preamp and speaker-level inputs
  • speaker-level inputs require speaker wire to RCA adapters
  • speaker-level inputs feature DC offset or signal sensing turn-on
  • wiring, fuse, and hardware not included with amplifier
  • 8-gauge power and ground wires and a 40-amp fuse recommended
  • 13-5/16"W (including flange) x 2-1/8"H x 6-3/4"D

Specification

  • RMS Power Output (Watts x Channels)    70 x 4
  • Peak Power Output (Watts x Channels)    N/A
  • Power at 2 Ohms (Watts x Channels)    100 x 4
  • Bridged Power (Watts x Channels)    200 x 2
  • Minimum Impedance Bridged    4
  • Minimum Impedance Unbridged    2
  • Minimum Impedance    2
  • Best Frequency Response    10-30k Hz
  • THD at Rated RMS Power    0.05%
  • Signal to Noise Ratio    100 dB
  • Input Voltage    14v
  • Features
  • Amplifier Class    AB
  • Low-Pass Crossover Frequency    40-400 Hz
  • Low-Pass Slope (dB/octave)    12 dB/octave
  • High-Pass Crossover Frequency    40-400 Hz
  • High-Pass Slope (dB/octave)    12 dB/octave
  • Bass Boost    No
  • Bass Boost Frequency    N/A
  • Fan Cooled    No
  • Fuse Rating    40
  • Speaker Level Inputs    RCA
  • Preamp Outputs    No
  • Width (inches)    13-5/16
  • Height (inches)    2-1/8
  • Depth (inches)    6-3/4

What's Included

  • 4-Channel amplifier
  • Four 5/8" Screws
  • Two M4x4mm Machine screws (top panel replacement screws)
  • 2mm Allen wrench
  • 2.5mm Allen wrench
  • 4mm Allen wrench
  • Owner's manual

Leave a review