JL Audio XD1000/5 v2 XD Series 5 Channel Stereo Mono Class D Amplifier 1000w RMS

JL Audio XD1000/5 v2 XD Series 5 Channel Stereo Mono Class D Amplifier 1000w RMS

XD1000/5v2

5 Ch. Class D System Amplifier, 1000 W

2-year-warranty

£0.00
£849.99
IN STOCK
CENXD10005

Order in the next and choose express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

View / leave a review

There are no reviews for this product.

Product Information

5-Channel Class D System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4V

The XD1000/5v2 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 600 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.

The XD1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. 

The XD1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Specification

  • Rated Continuous (RMS) Power @ 14.4 V
  • Main Channels @ 4 Ω    75 W RMS x 4
  • Main Channels @ 2 Ω    100 W RMS x 4
  • Main Channels - Bridged @ 4Ω    200 W RMS x 2
  • Subwoofer Channel @ 4 Ω    400 W RMS x 1
  • Subwoofer Channel @ 3 Ω    500 W RMS x 1
  • Subwoofer Channel @ 2 Ω    600 W RMS x 1
  • Subwoofer Channel @ 1.5 Ω    N/A
  • Rated Continuous (RMS) Power @ 12.5 V
  • Main Channels @ 4 Ω    60 W RMS x 4
  • Main Channels @ 2 Ω    90 W RMS x 4
  • Main Channels - Bridged @ 4Ω    180 W RMS x 2
  • Subwoofer Channel @ 4 Ω    360 W RMS x 1
  • Subwoofer Channel @ 3 Ω    480 W RMS x 1
  • Subwoofer Channel @ 2 Ω    600 W RMS x 1
  • Subwoofer Channel @ 1.5 Ω    N/A
  • General Specifications
  • Frequency Response (Main Channels)    12 Hz - 22 kHz (+0, -1dB)
  • Frequency Response (Subwoofer Channel)    10 Hz - 1 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power (Main Channels)    >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W    >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω    >150 / 50 Hz
  • Damping Factor @ 2 Ω    >75 / 50 Hz
  • THD+N @ Rated Power (Main Channels)    <1% @ 2 Ω per Ch.
  • THD+N @ Rated Power (Subwoofer Channels)    <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs    Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  • Min.Copper Power / Ground Wire Gauge    4 AWG wire
  • Fuse Rating    80 A (AFS, AGU or MaxiFuse™)
  • Signal Processing
  • Filter Mode(s): Channels 1 & 2 (front)    High-Pass only
  • Filter Slope(s): Channels 1 & 2 (front)    12 dB/octave
  • Filter Frequency Range: Channels 1 & 2 (front)    50 Hz - 5 kHz
  • Filter Mode(s): Channels 3 & 4 (rear)    High-Pass or Bandpass
  • Filter Slope(s): Channels 3 & 4 (rear)    12 dB/octave
  • Filter Frequency Range: Channels 3 & 4    50 Hz - 500 Hz
  • Filter Mode(s): Subwoofer Channel    Low-Pass only
  • Filter Slope(s): Subwoofer Channel    12/24 dB/octave
  • Filter Frequency Range: Subwoofer Channel    50 Hz - 500 Hz
  • Detented, Calibrated Filter Freq. Potentiometers    Yes
  • Filter Defeat Function    Yes
  • Infrasonic Filter: Subwoofer Channel    none
  • Remote Level Control    Optional (HD-RLC)
  • Remote Level Modes    Sub Ch. or All Channels
  • Channel Input Mode Switch    Yes (2/4/6 ch.)
  • Pass-Through Preamp Output    None
  • Source Channel Selection for PreOuts    N/A
  • Height (H)    2.05 in / 52 mm
  • Width (W)    14.73 in / 374 mm
  • Depth (D)    7.09 in / 180 mm

What's Included

  • XD1000/5v2

Leave a review