JL Audio VXi-HUB JLid Comm & Optical Audio Network Hub for VXi Amps Amplifiers
JLid™ Comm & Optical Audio Network Hub for VXi Amplifiers
There are no reviews for this product.
JLid™ Comm & Optical Network Hub for VXi Amplifiers
The VXi amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of its integrated DSP technology. VXi-HUB is an accessory designed to simplify the control of a networked amplifier system, while greatly easing the setup process, by allowing all amplifiers to appear in a single TüN™ software session.
VXi-HUB performs two distinct functions as part of a system employing two or more VXi amplifiers: data networking and digital audio distribution.
Data networking is the primary function of the VXi-HUB, permitting a network of VXi amplifiers to respond to synchronized commands from a single DRC controller (DRC-100, DRC-200 or DRC-205, all sold separately). These commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection.
The VXi-HUB also enables the networked VXi amplifiers to be tuned from within a single TüN™ software session, allowing the user to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
For data networking purposes, the VXi-HUB is equipped with one Master and five Slave JLid-COMM connections, permitting the networking of up to six VXi amplifiers using standard CAT5e cables (one master amplifier and five slave amplifiers). For more complex systems, two VXI-HUBs can be daisy-chained to create a network of up to ten VXi amplifiers (one master amplifier and nine slave amplifiers).
VXi-HUB also includes a dedicated JLid-COMM accessory port to allow the connection of the optional VXi-BTC Bluetooth® Communicator (sold separately). This accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS® or Android® device with TüN™ Mobile or TüN™ Express apps.
The secondary function of the VXi-HUB is to distribute synchronous optical digital audio signals to the networked amplifiers, avoiding the delays associated with handing digital signals off through a chain of amplifiers. The optical digital audio output of a source unit connects directly to the VXi-HUB's Optical Audio Input, which then distributes synchronous digital audio to the amplifiers from its five Optical Outputs. VXi-HUB handles S/PDIF signals up to 24 bits/192 kHz.
For ease of connection, the VXi-HUB is powered via the JLid™ connection to VXI amplifiers and requires no separate power or turn-on wiring.
- Height (H) 1.05 in / 26 mm
- Width (W) 6.5 in / 165 mm
- Depth (D) 3.86 in / 98 mm
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs / 1 Accessory Port
- Optical Audio (S/PDIF) Connections: 1 Input / 5 Synchronous Outputs
- 3-Way Configuration Switch: Standalone / Primary / Secondary
- Amp Identifier Status LEDs
- Powered via JLid™ connection to VXi amplifiers
You may also like
ACR-2Dash Remote£47.49 ✓IN STOCK
ACR-3Dash Remote£46.00 ✓IN STOCK
HELIX SDMI25 MOST25Simply clever – the HELIX SDMI25 is the “smartest solution” to integrate DSP products into vehicles with premium sound system.£349.99 ✓IN STOCK
DRC-100Digital Remote Control for JLid™ compatible products£59.95 ✓IN STOCK
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.£47.49 ✓IN STOCK
ES3BIT ENERGY STORAGE START & STOPIt prevents the processor from shutting down when turning on cars featuring the start & stop system.Â£47.49 ✓IN STOCK
ACR-1Dash Remote£46.95 ✓IN STOCK
AP F IN ADPADAPTER FROM AP P&P IN TO AP F 8.9 BIT£28.49 ✓IN STOCK
MBT-CRXv2Weatherproof Bluetooth® Controller / Receiver£109.99 ✓IN STOCK
MHD-RLCWater-Resistant Amplifier Remote Level Control and Cable£49.99 ✕OUT OF STOCK
PIC 6PRE IN CONNECTOR 6£37.99 ✓IN STOCK
VCR-S1SUB VOLUME REMOTE CONTROL£47.49 ✓IN STOCK
SFCAudison Sampling Frequency Converter£151.99 ✓IN STOCK
DRC AB DIGITAL REMOTE CONTROLMultimedia Display for bit Prima & ThesisDRC AB enables the main system control (volume, balance, fader and subwoofer volume, bass-boost) without the use of a PC. Thanks to this device, installed in an ergonomic position within the car dashboard, the user can: choose between the four DSP presets and select the source among master, auxiliary and the two optical digital inputs.£132.99 ✓IN STOCK
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, Rubber Touch£151.99 ✓IN STOCK
CBT 1 RCARCA connector making link fast and link.£47.49 ✓IN STOCK
Audison USS4UNIVERSAL SPEAKERS SIMULATOR£37.99 ✓IN STOCK
Voce AV bit IN HDDigital interface for all AV amplifiers. It offers one AD Link and AC Link input as well as one AD Link and AC Link output for a perfect digital connection with digital processors (bit one and bit Ten D) to drive a multi-amplified system.£170.95 ✓IN STOCK
AC-LGDload generating device & signal stabiliser£47.49 ✓IN STOCK
Prima Tower KitStack 2 or 3 Prima Amplifiers£94.99 ✓IN STOCK