
2 YEAR WARRANTY
JL Audio MX280/4 Class D 4 Channel Full Range Speaker Amp Amplifier 280w RMS
MX280/4
4 Ch. Class D Full-Range Amplifier, 280 W
There are no reviews for this product.
MX280/4
4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω - 14.4V
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
MX280/4
4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω - 14.4V
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
- Frequency Response 20 Hz - 20 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω >60 / 50 Hz
- Damping Factor @ 2 Ω >30 / 50 Hz
- THD+N @ Rated Power <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
- Min.Copper Power / Ground Wire Gauge 8 AWG wire
- Fuse Rating 35 A (AFS, AGU or MaxiFuse™)
- @ 4 Ω 50 W RMS x 4
- @ 2 Ω 70 W RMS x 4
- Bridged @ 4Ω 140 W RMS x 2
- MX280/4
-
Product Information
MX280/4
4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω - 14.4V
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
-
Specification
- Frequency Response 20 Hz - 20 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω >60 / 50 Hz
- Damping Factor @ 2 Ω >30 / 50 Hz
- THD+N @ Rated Power <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
- Min.Copper Power / Ground Wire Gauge 8 AWG wire
- Fuse Rating 35 A (AFS, AGU or MaxiFuse™)
- @ 4 Ω 50 W RMS x 4
- @ 2 Ω 70 W RMS x 4
- Bridged @ 4Ω 140 W RMS x 2
-
What's Included
- MX280/4
You may also like

JL Audio MV1000/1 MVi Series Monoblock Marine Subwoofer Amplifier DSP 1000w RMS
MV1000/1Monoblock Class D Marine Subwoofer Amplifier, 1000 W
£1,199.00
Hertz PowerSports HMP 4D Marine 4 Channel Stereo Amp Amplifier 300w RMS
HMP 4D MARINE & POWERSPORTS 4 CHANNEL AMPLIFIERThanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter.
£269.00
JL Audio MV1000/5i MVi Series Class D 5 Channel Marine Amplifier DSP 1000w RMS
MV1000/5i5 Ch. Class D Marine System Amplifier with Integrated DSP, 1000 W
£1,399.00
JL Audio MV600/6i MVi Series 6 Channel Full Range Marine Amplifier DSP 600w RMS
MV600/6i6 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 600 W
£1,299.00
JL Audio MX500/1 Class D 1 Channel Monoblock Subwoofer Amp Amplifier 500w RMS
MX500/1Monoblock Class D Wide-Range Amplifier, 500 W
£429.00
JL Audio MV400/4i MVi Series 4 Channel Full Range Marine Amplifier DSP 400w RMS
MV400/4i4 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 400 W
£999.00
JL Audio MV600/1 MVi Series Monoblock Marine Subwoofer Amplifier DSP 600w RMS
MV600/1Monoblock Class D Marine Subwoofer Amplifier, 600 W
£899.00
JL Audio MV600/2i MVi Series 6 Channel Full Range Marine Amplifier DSP 600w RMS
MV600/2i2 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 600 W
£1,099.00
JL Audio MV800/8i MVi Series 8 Channel Full Range Marine Amplifier DSP 800w RMS
MV800/8i8 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 800 W
£1,499.00
JL Audio MX300/1 Class D 1 Channel Monoblock Subwoofer Amp Amplifier 300w RMS
MX300/1Monoblock Class D Wide-Range Amplifier, 300 W
£309.00
Hertz PowerSports HMP 1D Marine 1 Channel Mono Subwoofer Amp Amplifier 300w RMS
HMP 1D MARINE & POWERSPORTS MONO AMPLIFIERThanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 1D amplifiers is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter.
£269.00
JL Audio MV700/5i MVi Series 5 Channel Full Range Marine Amplifier DSP 700w RMS
MV700/5i5 Ch. Class D Marine System Amplifier with Integrated DSP, 700 W
£1,199.00