Product Information

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V

Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.

The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. 

The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.

Specification

• Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω    600 W RMS x 1
• @ 3 Ω    800 W RMS x 1
• @ 2 Ω    1000 W RMS x 1
• @ 1.5 Ω    N/A
• Rated Continuous (RMS) Power @ 12.5 V
• @ 4 Ω    500 W RMS x 1
• @ 3 Ω    650 W RMS x 1
• @ 2 Ω    800 W RMS x 1
• @ 1.5 Ω    N/A
• Frequency Response    7 Hz - 500 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power    >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W    >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω    >1000 / 50 Hz
• Damping Factor @ 2 Ω    >500 / 50 Hz
• THD+N @ Rated Power    <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs    Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
• Min.Copper Power / Ground Wire Gauge    4 AWG wire
• Fuse Rating    80 A (AFS, AGU or MaxiFuse™)
• Filter Mode(s)    Low-Pass only
• Filter Slope(s)    12 dB/octave
• Filter Frequency Range    50 Hz - 500 Hz
• Detented, Calibrated Filter Freq. Potentiometer    No
• Filter Defeat Function    No
• Infrasonic Filter    No
• Bass Boost EQ    Yes
• Output Polarity Switch    No
• Remote Subwoofer Level Control    Optional (RBC-1)
• Remote Bass EQ Boost Control    No
• Pass-Through Preamp Output    Buffered
• Height (H)    2.10 in / 53 mm
• Width (W)    11.40 in / 290 mm
• Depth (D)    7.50 in / 190 mm

What's Included

• Monoblock subwoofer amplifier
• 2.5mm Hex key
• 3mm Hex key
• Owner's manual