JL Audio FiX-LSA-4 4 Channel Load Sensing Adaptor for FiX-82 or FiX-86 DSP
4-Ch. Load Sensing Adaptor for use with FiX™ OEM Integration DSP
There are no reviews for this product.
4-Ch. Load-Sensing Adaptor for use with FiX™ 82 or FiX™ 86 OEM Integration DSP
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX™ DSP, is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX™ DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX™ is connected to more than four channels of audio from your OEM head unit or amplifier.
You must recalibrate the FiX OEM Integration DSP after installing this load sensing adapter (LSA). The LSA changes the input signal level, requiring recalibration of the FiX.
- FiX-LSA-4 Load Sensing adapter
- Installation Instructions
You may also like
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, Rubber Touch£151.99 ✓IN STOCK
JL Audio MBT-RXMarine-rated Bluetooth® adapter£49.95 ✓IN STOCK
AP F IN ADPADAPTER FROM AP P&P IN TO AP F 8.9 BIT£28.49 ✓IN STOCK
Voce AV bit IN HDDigital interface for all AV amplifiers. It offers one AD Link and AC Link input as well as one AD Link and AC Link output for a perfect digital connection with digital processors (bit one and bit Ten D) to drive a multi-amplified system.£170.95 ✓IN STOCK
Hertz HRCSub Level Controller£33.24 ✓IN STOCK
STASTA Female to Female Optical Cable Adapter£28.49 ✓IN STOCK
AC-LGDload generating device & signal stabiliser£47.49 ✓IN STOCK
HELIX SDMI25 MOST25Simply clever – the HELIX SDMI25 is the “smartest solution” to integrate DSP products into vehicles with premium sound system.£349.99 ✓IN STOCK
CONDUCTORThe CONDUCTOR combines design and functionality in perfection.£109.95 ✓IN STOCK
HELIX DSP.3Digital 8 channel signal processor with 48 kHz / 24 Bit signal path£459.99 ✓IN STOCK
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus.£142.49 ✓IN STOCK
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.£47.49 ✓IN STOCK
APL 2AP4 D - AP1 D LINK CABLE£28.49 ✓IN STOCK
VXi-BTCJLid™ Bluetooth® Communicator for VXi Amplifiers£109.99 ✓IN STOCK
ACR-2Dash Remote£47.49 ✓IN STOCK
HM RGB 1 BK RGB CONTROLLER WITH RF REMOTE CONTROLThe HM RGB 1 BK enhances your experience with multicolor LED lighting that can be changed to fit your mood or craft.£104.49 ✓IN STOCK
CL-RLCRemote Level Control / Line Driver£89.95 ✓IN STOCK
HELIX V TWELVE DSP12 Channel amplifier with integrated 14-channel DSP 8 x 75 / 150 Watts @ 4 Ohms£1,274.99 ✓IN STOCK
Audison USS4UNIVERSAL SPEAKERS SIMULATOR£37.99 ✓IN STOCK
AudioControl AC-BT24Bluetooth® adapter for an AudioControl DSP deviceThe AC-BT24 enables high definition Bluetooth® audio streaming (aptX HD support) and programming for AudioControl DSP products featuring the Option Port. Stream hires audio directly to the DM-810 and DM-608 DSP or the D-6.1200 DSP amplifier and program the DSP simultaneously.£199.99 ✓IN STOCK