JL Audio CL-RLC Remote Control Line Driver for Subwoofer Level or Volume Control

JL Audio CL-RLC Remote Control Line Driver for Subwoofer Level or Volume Control


Remote Level Control / Line Driver



Order in the next and choose express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

Available to back order, please contact us to confirm delivery date.
View / leave a review

There are no reviews for this product.

Product Information

Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs

The Possibilities are Endless...

The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC's differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC's control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.

Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.

Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod® input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.


  • Channel Separation    >80 dB
  • Output Impedance    475 Ω
  • Gain Range    7.5 V RMS
  • Max. Unclipped Output    7.5 V RMS
  • Frequency Response    10 Hz - 30 kHz (+0/-1 dB)
  • THD+N @ Rated Output    Less than 0.05% @ 7.5 V RMS
  • S/N Ratio    >117 dB @ 7.5 V RMS
  • Max. Input Level    4 V RMS
  • Operating Current Draw    90 mA

What's Included

  • 2-Channel remote level control preamplifier
  • Wired remote control knob
  • 18' Wired remote connection cable
  • 2 Nuts
  • 2 Washers

Leave a review