2 YEAR WARRANTY
JL Audio C7-650cw C7 Series 6.5" 16.5cm Car Component Woofer Speaker 125w RMS
6.5-inch (165 mm) Component Woofer, Single
There are no reviews for this product.
6.5-inch (165 mm) Component Woofer, with Grille
C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.
The C7-650cw component woofer is capable of operating in a 3-way system, with a midrange and tweeter, or with only a tweeter in a 2-way configuration. Engineered from the ground up, it has exceptional linear excursion capability and outstanding linearity, resulting in solid mid-bass and pure, precise, mid-range performance. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.
Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.
C7-650cw Design Notes:
Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high frequency behavior.
Suspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cw's outstanding excursion capability.
Motor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontium-ferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver's performance range.
A 32 mm (1.27 inch) diameter, overhung voice coil is employed, wound with copper wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area, and our Patented Elevated Frame Cooling technology.
With 48 dB/octave filters: 50 Hz - 5 kHz
With 24 dB/octave filters: 60 Hz - 5 kHz
With 12 dB/octave filters: 70 Hz - 5 kHz
Built in USA with Global Components
Sold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert.
- Continuous Power Handling (RMS) 125 W
- Peak Music Power 225 W
- Recommended Amplifier Power (RMS) 50 - 175 W / Ch.
- Nominal Impedance 4 Ω
- Frequency Response 50 Hz - 5 KHz ± 3 dB
You may also like
APK 163Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.£329.00 IN STOCK
TS-D65C17cm 2-Way Component Speaker System (270 W)£149.00 OUT OF STOCK
DCX 165.3 Two way coaxialTo meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability.£76.00 IN STOCK
Focal Performance 165AS3Access Series 6-1/2" 3-way component speaker system£229.00 IN STOCK
2-WAY COMPONENT KITIS PSA 165 is a kit designed for all drivers wanting to install a hi-fi quality sound solution in their car.£319.00 LOW STOCK
TS-A1370F13cm 3-Way Coaxial System (300W)£60.00 OUT OF STOCK
MATCH UP C42MB-FRT Approved compatibility with C Class, E Class, GLC and S ClassPremium cars deserve premium sound – the basic speaker setup in Mercedes vehicles does not meet the expectations of ambitious music lovers in many cases£179.00 IN STOCK
C2-650x6.5-inch (165 mm) Coaxial Speaker System£219.00 LAST ONE
X 170 Uno coaxialsThe 6.7” two way coaxials X 170 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup.£66.00 IN STOCK
JL Audio C1-570xC1 Series 5"x7" 2-way car speakers£109.00 IN STOCK
JL Audio C3-600Evolution™ C3 Series 6" convertible component speaker system£399.00 LOW STOCK
X 165 Uno coaxialsThe 6.5” two way coaxials are available X 165 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup.£45.00 IN STOCK
HMX 6.5 S LD POWERSPORTS COAX RGB LEDThe HMX 6.5 S LD hi-performance powersport coaxial speakers with RGB LEDs lighting option is optimized to perform in infinite baffle, with a solid bass and an outstanding output.£249.00 IN STOCK
2-WAY COMPONENT KITThe IS VW 155 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution.£159.00 LAST ONE
MATCH UP C42BMW-FRT.3Approved compatibility with BMW ModelsPremium cars deserve premium sound – the basic speaker setup in BMW vehicles does not meet the expectations of ambitious music lovers in many cases£189.00 IN STOCK
APX 6.5APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The 6.5″ cones surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.£129.00 IN STOCK
C1-690x6 x 9-inch (150 x 230 mm) Coaxial Speaker System£149.00 IN STOCK
2-WAY COMPONENT KITThe IS VW 165 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution.£169.00 LOW STOCK
2-WAY COAXIAL KITIC TOY 165 is designed for drivers who want to replace their original audio system with a quality sound solution.£139.00 IN STOCK
AP 6.5 Ω2AP 6.5 Ω2 woofer has been developed with 2Ω nominal impedance with the purpose of exploiting all the power made available by the AP8.9 bit amplifier capable of 65W into a 2Ω load.£109.00 IN STOCK