W1v3 10-inch Subwoofer (300 W, 4 Ω)

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.

The 10W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. 

• Continuous Power Handling (RMS)    300 W
• Recommended Amplifier Power (RMS)    75 - 300 W
• Nominal Impedance (Znom)    4 Ω
• Nominal Diameter    10.0 in / 250 mm
• Overall Diameter (A)    10.5 in / 267 mm
• Mounting Hole Diameter (B)    9.0625 in / 230 mm
• Bolt Hole Circle Diameter (C)    9.7 in / 246 mm
• Motor Outer Diameter (D)    4.92 in / 125 mm
• Mounting Depth (E)    4.6 in / 117 mm
• Driver Displacement    0.037 cu ft / 1.05 L
• Net Weight    9.9 lb / 4.5 kg
• Free Air Resonance (Fs)    26.15 Hz
• Electrical “Q” (Qes)    0.475
• Mechanical “Q” (Qms)    7.243
• Total Speaker “Q” (Qts)    0.446
• Equivalent Compliance (Vas)    1.533 cu ft / 43.41 L
• One-Way Linear Excursion (Xmax)*    0.45 in / 11 mm
• Reference Efficiency (no)    0.16%
• Efficiency (1 W / 1 m)**    84.2 dB SPL
• Effective Piston Area (Sd)    53.584 sq in / 0.0346 sq m
• DC Resistance (Re)    3.902 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

• 10W1v3-4
• Black plastic trim ring
• Owner's manual