Hertz HCP 5MD Marine 5 Channel Speaker Sub Amp Amplifier 4x65w + 1x200w RMS
MARINE 5 CHANNELS AMPLIFIER
There are no reviews for this product.
HCP 5MD marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier.
Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies.
More specifically HCP 5MD is suitable for a five channels system with subwoofer, a tree channel front + sub system using the front and rear built-in filters that also include a bass boost circuit and a subsonic filter.
D-CLASS OUTPUT STAGE
Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable output stage.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated Marine grade (epoxy coated) PCB boards.
SALT FOG PROOF
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
WATER JET TESTED
The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
Channel mode 5 - 3
Output Power (RMS) @ 14.4 VDC
- 5 Ch: 65 W x 4 + 200 W x 1 (4 Ω)
- 5 Ch: 105 W x 4 + 330 W x 1 (2 Ω)
- 3 Ch: 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω)
- 3 Ch: 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω)
- FRONT/REAR Ch: 50 ÷ 5k Hz @ 12 dB/Oct.
- SUB Ch: 50 ÷ 500 Hz @ 24 dB/Oct.
- REAR Ch: 50 ÷ 500 Hz (Hi) @ 12 dB/Oct. - 50 ÷ 5 kHz (Lo) @ 12 dB/Oct.
- on/off: 25 Hz @ 24 dB/Oct.
- Distortion - THD
- (100Hz @ 4Ω) 0.02 %
- S/N Ratio
- (A weighted @ 1V) 100 dB
- Damping factor
- (100Hz @ 4Ω) 100
- Size W x D x H
- mm (in.) 345 x 190 x 50 / 13.58 x 7.48 x 1.97
- Hertz HCP 5MD
You may also like
JL Audio VX800/8i8 Ch. Class D Full-Range Amplifier with Integrated DSP, 800 W£1,399.99 OUT OF STOCK
AP F8.9 bit 8 CH AMPLIFIER WITH 9 CH DSP 24VThe new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio. The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience.£949.99 IN STOCK
HMP 1D MARINE & POWERSPORTS MONO AMPLIFIERThanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 1D amplifiers is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter.Â£256.49 IN STOCK
GM-A47044-Channel Bridgeable Amplifier (520W)£102.95 OUT OF STOCK
LC-6.1200high-power multi-channel amplifier with accubass®£759.99 IN STOCK
HCP 4 FOUR CHANNEL AMPLIFIERHCP 4 is a four channels car audio amplifier designed to reproduce any musical genres with four separate channels for multiple configurations.£189.99 IN STOCK
SR 1.500MONO AMPLIFIER WITH CROSSOVER£379.99 IN STOCK
JL Audio VX600/6i6 Ch. Class D Full-Range Amplifier with Integrated DSP, 600 W£1,199.99 OUT OF STOCK
MX300/1Monoblock Class D Wide-Range Amplifier, 300 W£269.99 IN STOCK
acm-1.300monoblock micro amplifier with accubass®£313.49 IN STOCK
RD400/44 Ch. Class D Full-Range Amplifier, 400 W£349.99 OUT OF STOCK
AP F8.9 bit 8 CH AMPLIFIER WITH 9 CH DSPThe new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio. The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience.£945.00 IN STOCK
ML Power 4 D-CLASS FOUR CHANNEL AMPLIFIERMille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers.Â£455.99 IN STOCK
AV due 900 W POWER AMPLIFIERAV due is a powerful stereo amplifier.The power supply section and final stage, designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS).£664.99 IN STOCK
XD600/6v26 Ch. Class D Full-Range Amplifier, 600 W£619.99 OUT OF STOCK
JX400/4D4 Ch. Class D Full-Range Amplifier, 400 W£249.99 OUT OF STOCK
Thesis HV ventiTHE AMPLIFIER£8,074.99 IN STOCK
AP4.9 bitAP4.9 bit amplifier is ideal to realize a powerful two way front full active. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.£569.99 IN STOCK
MX280/44 Ch. Class D Full-Range Amplifier, 280 W£269.99 OUT OF STOCK