Hertz HCP 5MD 24v Marine 5 Channel Speaker Sub Amp Amplifier 4x65w + 1x200w RMS
HCP 5MD 24v
MARINE 5 CHANNELS AMPLIFIER
There are no reviews for this product.
HCP 5 MD 24V marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier.
Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies.
More specifically HCP 5MD 24V is suitable for a five channels system with subwoofer, a tree channel front + sub system using the front and rear built-in filters that also include a bass boost circuit and a subsonic filter.
D-CLASS OUTPUT STAGE
Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable output stage.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated Marine grade (epoxy coated) PCB boards.
SALT FOG PROOF
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
WATER JET TESTED
The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
- Hertz HCP 5MD
Channel mode 5 - 3
Output Power (RMS) @ 14.4 VDC
- 5 Ch: 65 W x 4 + 200 W x 1 (4 Ω)
- 5 Ch: 105 W x 4 + 330 W x 1 (2 Ω)
- 3 Ch: 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω)
- 3 Ch: 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω)
- FRONT/REAR Ch: 50 ÷ 5k Hz @ 12 dB/Oct.
- SUB Ch: 50 ÷ 500 Hz @ 24 dB/Oct.
- REAR Ch: 50 ÷ 500 Hz (Hi) @ 12 dB/Oct. - 50 ÷ 5 kHz (Lo) @ 12 dB/Oct.
- on/off: 25 Hz @ 24 dB/Oct.
- Distortion - THD
- (100Hz @ 4Ω) 0.02 %
- S/N Ratio
- (A weighted @ 1V) 100 dB
- Damping factor
- (100Hz @ 4Ω) 100
- Size W x D x H
- mm (in.) 345 x 190 x 50 / 13.58 x 7.48 x 1.97
You may also like
ML Power 5 D-CLASS FIVE CHANNEL AMPLIFIERMille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers.Â£569.99 £599.99
acm-1.300monoblock micro amplifier with accubass®£313.45 £329.95
ML Power 4 D-CLASS FOUR CHANNEL AMPLIFIERMille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers.Â£455.99 £479.99
AP8.9 bitThe AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications. The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 520 W total can be achieved in an extremely compact case. The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier.£655.49 £689.99
4/3/2 Channel Power Density Digital AmplifierPDX-F6Meet the New Amplifier Benchmark£494.95
All-in-one sound upgrade for any vehicle4.1 Channel Digital Sound Processor (DSP) with Powered SubwooferPWD-X5£499.95
TH unoMONO POWER AMPLIFIERThesis amplifiers are born with the know-how and experience achieved with the HV venti, improved by the innovation of digital technology. The result is a perfect combination between the highest level of analog technology and the advanced features of the digital technology in one unique product. The precious synergy with Full DA HD technology takes the in-car listening experience to a new level of excellence; the synthesis of a unique know-how employed in mobile audio reproduction.TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.£2,564.99 £2,699.99
HCP 1D D-CLASS MONO AMPLIFIERHCP 1D is a mono D Class car audio amplifier , with an incredibly minimized size heat sink. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.£236.55 £249.00
AuDitoRAP 43404/3/2-channel A/B class amplifier£158.95
XD600/6v26 Ch. Class D Full-Range Amplifier, 600 W£494.96 £549.95
HCP 4 FOUR CHANNEL AMPLIFIERHCP 4 is a four channels car audio amplifier designed to reproduce any musical genres with four separate channels for multiple configurations.£189.05 £199.00
XD500/3v23 Ch. Class D System Amplifier, 500 W£431.96 £479.95
GM-D1004Easy to install, 4-channel car amp with TVC concept and input sensor (400W)£89.95
XD600/1v2Monoblock Class D Subwoofer Amplifier, 600 W£314.96 £349.95
AP5.9 bitAP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2. The built-in processor with 9 output channels, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the optional stacking system.£617.49 £649.99
GM-D9701Mono 2400W Class-D Car Amp, with Bass Boost Remote£157.95
AP4 DThe AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.£303.99 £319.99
GM-D87044-Channel 1200W Class-FD Car Amp.£138.95