Helix

2 YEAR WARRANTY

Helix M One X Mono Subwoofer Amp 1 Channel Class D Amplifier 1030w RMS 1 Ohm

Helix M One X Mono Subwoofer Amp 1 Channel Class D Amplifier 1030w RMS 1 Ohm

HELIX M ONE X

1 Channel Class D Amplifier

£0.00
£299.00
IN STOCK
CENMONEX

Order in the next and choose express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

Available for special order, please contact us to confirm delivery date.
View / leave a review

There are no reviews for this product.

Product Information

HELIX M ONE X

Small, efficient and uncompromisingly stable - the M ONE X is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link.

In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.

Features

  • Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
  • Start-Stop capability down to 6V supply voltage
  • Smart highlevel input with ADEP circuit and Auto Turn-On function
  • Integrated, active crossover with lowpass, bass boost, subsonicand phase control
  • TwinPower Link for connecting two amplifiers in bridged mode
  • Bass remote control for volume adjustment
  • Low heat dissipation thanks to extraordinary efficiency

Smart highlevel input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE.

The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability

The switched power supply of the HELIX M ONE assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.

Specification

  • Power RMS ≤ 1% THD+N    Normal operation 
  • (One amplifier)    TwinPower Link 
  • (Two amplifiers)
  • - @ 4 Ohms    1 x 400 Watts     1 x 1,400 Watts
  • - @ 2 Ohms    1 x 700 Watts    1 x 2,060 Watts
  • - @ 1 Ohm    1 x 1,030 Watts    - 
  • - bridged @ 4 Ohms    -    - 
  • - bridged @ 2 Ohms    -    - 
  • Max. output power per channel*:    Up to 1,180 Watts RMS @ 1 Ohm
  • Amplifier technology    Class D
  • Inputs    2 x RCA / Cinch
  • 2 x Highlevel speaker input
  • 1 x Remote In
  • 1 x Remote control input
  • Input sensitivity    RCA / Cinch 0.5 - 6 Volts
  • Highlevel 1.1 - 13 Volts
  • Input impedance RCA / Cinch    20 kOhms
  • Input impedance highlevel    9 - 33 Ohms
  • Outputs    1 x Speaker output
  • Output voltage RCA / Cinch    - 
  • Signal converter for digital input    - 
  • Frequency response    10 Hz - 250 Hz
  • Bass boost    0 - 12 dB / 30 - 80 Hz
  • Highpass    - 
  • Lowpass    50 Hz - 250 Hz adjustable
  • Bandpass    10 Hz - 250 Hz adjustable
  • Subsonic    10 Hz - 50 Hz adjustable
  • Phase    0 - 180° adjustable
  • Slope high- / lowpass    - 
  • Slope subsonic / lowpass    12 / 24 dB/Oct.
  • Signal-to-noise ratio digital input    - 
  • Signal-to-noise ratio analog input    95 dB (A-weighted)
  • Distortion (THD)    0.20 %
  • Damping factor    150
  • Operating voltage    10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current    800 mA
  • Fuse    3 x 40 A Maxi-fuse (APX)
  • Additional features    Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control 
  • Dimensions (H x W x D)    50 x 320 x 154 mm / 
  • 2.00 x 12.60 x 6.06”

* In typical applications as subwoofer amplifier

What's Included

  • Amplifier HELIX M ONE X
  • Cable remote control
  • Mounting material
  • Instruction manual

Leave a review