Audison Prima Forza AP F8.9 bit 8 Channel Amplifier & 9 Channel DSP 1040w RMS

Audison Prima Forza AP F8.9 bit 8 Channel Amplifier & 9 Channel DSP 1040w RMS

AP F8.9 bit 8 CH AMPLIFIER WITH 9 CH DSP

The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio. The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.


2-year-warrantyfree-royal-mail-delivery

£0.00
£999.99

There are no reviews for this product.

Earn 0 reward points CEN31001

Product Details

Full DA - Full Digital Audio

Pure digital signal transfer with a resolution up to 24 bit / 48 kHz.

BIT DRIVE

Auto tuning by Audison bit Tune and communication with bit Drive portal.

DE-EQ - De Equalization

De-equalization function to “flatten” any equalization applied by default by OEM sources.

USS technology

USS technology allows APF 8.9 bit to work with head-units featuring the “speaker load detection” circuit

iDatalink Maestro AR compatibility

When AP bit amplifiers are installed into a compatible vehicle using the iDatalink Maestro AR (sold separately), the user can enjoy a perfect integration with factory installed navigation, advanced safety systems, voice-controlled hands-free and infotainment. (Only for North America)

  • Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
  • Operating power supply voltage 6.5V ÷17V
  • Idling current 1.6 A
  • Switched off without DRC 1.7mA
  • Switched off with DRC 5 mA
  • Consumption @ 14.4 VDC, 2Ω, Max Musical Power 55 A
  • Remote IN 6 ÷ 15 VDC (1 mA)
  • Remote OUT 4 ÷ 15 VDC (150 mA)
  • ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC
  • AST - Automatic Signal Turn on/off (Selectable) Speaker-In
  • Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0,06%
  • Damping factor @ 1 kHz, 4Ω, 2 VRMS > 110
  • Bandwidth @ -1.5 dB 10Hz ÷ 22kHz
  • S/N ratio (A weighted @ 1 V Input) Master Input 100 dBA
  • S/N ratio (A weighted @ 1 V Input) Optical Input 105 dBA
  • Input sensitivity Pre-In 0.6 ÷ 6 VRMS
  • Input sensitivity Speaker-In 2.2 ÷ 22 VRMS
  • Filter type Full / Hi pass / Low Pass / Band Pass Filter mode and slope
  • Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB
  • Crossover frequency 68 steps @ 20 ÷ 20k Hz
  • Phase control 0° / 180°
  • Bass Boost N.1 Adjustable Parametric Pole
  • Analog Input Equalizer (20 ÷ 20k Hz) Automatic De-Equalization
  • Output Equalizer N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
  • Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches
  • Time Alignment Delay 0 ÷ 15 ms
  • Time Alignment Step 0.08 ms; 2.8 cm / 1.1 inch
  • Time Alignment Fine SET 0.02 ms; 0.7 cm / 0.27 inch
  • Preset (Drive Preset) Rotary switch for 7 installation Presets
  • Acoustic Preset N.2 DSP Memory, DRC selectable

Whats Included

  • AP F8.9 bit amplifier
  • Multipolar cable, Rem/Control:
  • Multipolar cable, Input Pre-IN:
  • Multipolar cable, Input Speakers IN:
  • Multipolar cable Speakers OUT:
  • 2 - 30 A replacement fuse:
  • 1.8 m USB cable:
  • 2.5 mm hex key:
  • 4 - 4.2 x 50 mm self-tapping, cross head mounting screws:
  • CD ROM containing:
  • AP F8.9 bit Software
  • This owner’s manual (.pdf) Audio Test Tracks

manualdatasheet

Leave a review