BlackVue Power Magic PRO Dashcam Parking Mode Hardwire Volt Detection Cut off
POWER MAGIC PRO
Hardwiring Kit with Parking Mode Switch. Enjoy your dashcams Parking Mode.
There are no reviews for this product.
PROTECT YOUR BATTERY. ENJOY PARKING MODE.
Power Magic Pro supplies power to your BlackVue from your vehicles battery according to the configured voltage and timer to prevent vehicle battery discharge.
PARKING MODE SWITCH
Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value. Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on.
TIMER CUT-OFF SETTINGS
You can configure Power Magic Pro to supply power to your BlackVue for a preset duration, from 6 hours to infinity. The timer function is only active when the vehicles ignition is off and automatically stops if ignition is on.
* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.
LOW VOLTAGE CUT-OFF SETTINGS
When vehicles ignition is off, Power Magic Pro checks your vehicles battery voltage periodically while powering your BlackVue. If power drops below the set cut-off level, Power Magic Pro automatically cuts power to the dashcam, thus saving your vehicles battery life.
POWER YOUR BLACKVUE IN PARKING MODE
with Power Magic Pro.
Rest easy, knowing that your car is being monitored while you are away.
BlackVue dashcams automatically switches to Parking Mode to monitor your parked vehicle, but only writes to the memory card when something happens (motion or impact detected), which has two benefits:
Less chance for important files to be overwritten during long Parking Mode sessions.
Extended memory card lifespan in the long run.
- Model Name Power Magic Pro
- Rated output voltage DC 12~24V Output current / Quiescent current Rated current 1A, Max. 2A / Under 200µA
- Output voltage cut-off
- (on the basis of the input) 12 ~ 12.5V (±0.1V) / 22.8 ~ 23.2V (±0.2V) Output Voltage Restoration
- (on the basis of the input) Cut-off voltage +0.2V and higher
- Output Voltage Cut-off Timer Function 6 hours ~ Infinity
- Power Magic Pro
- Wire Harness
- Fixing Screws
- Double Side Tape
You may also like
20m EXTERNAL CAMERA WATERPROOF COAXIAL CABLE£59.95
DASHCAM MOUNT BRACKETDR750S Front Mount + 3M Tape£29.95
Genuine BlackVue microSD card32GB Micro SD Card£49.95
Mini Suction Cup MountPART NUMBER: 010-12530-05£14.50
4 Wire Hardwire Power CablePart Number: HPC4£44.95
BlackVue 12v Power Cable£29.95
3M Fixed Windscreen MountPart Number: 340N46700033£19.39
Hardwire Power CablePart Number: HPC£39.95
Power Magic Expansion Battery (B-124E)For Extended Parking ModeIMPORTANT: This Expansion Battery cannot be used on its own. It requires a BLACKVUE B124 ULTRA BATTERY.£269.95
BTC-3A All windshield type, designed for BlackVue DR750-2CH LTE.(Windshield angle of 0°–85° with the horizontal)Note: this tamper-proof case replaces the dashcam mount.£49.95
CEN Low Profile Mini Blade FuseAdd A Circuit Tap Piggy Back Fuse Holder£9.95
15m EXTERNAL CAMERA WATERPROOF COAXIAL CABLE£49.95
LTE Connectivity ModuleUSB Plug-in Connectivity Module (CM100LTE) for DR900X and DR750X dashcams.Empower your BlackVue dashcam with 4G LTE connectivity.£169.95
BTC-1B TAMPER-PROOF CASEA necessary security accessory for BlackVue dashcams£37.95
POWER MAGIC EZParking Mode has never been easier!£49.95
15m COAXIAL CABLECoaxial video cables for dual-channel BlackVue dashcams.£39.95
DASHCAM MOUNT BRACKETDR650 Front Mount + 3M Tape£29.95
Hardwire Power Cablefor Mio MiVue Dash Cameras£29.99
CEN Standard Blade FuseAdd A Circuit Tap Piggy Back Fuse Holder£9.95