BlackVue Power Magic PRO PowerMagic Hardwire Kit Battery Discharge Prevention
POWER MAGIC PRO
Hardwiring Kit with Parking Mode Switch. Enjoy your dashcams Parking Mode. Protect your cars Battery.
There are no reviews for this product.
PROTECT YOUR BATTERY. ENJOY PARKING MODE.
Power Magic Pro supplies power to your BlackVue from your vehicles battery according to the configured voltage and timer to prevent vehicle battery discharge.
PARKING MODE SWITCH
Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value. Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on.
TIMER CUT-OFF SETTINGS
You can configure Power Magic Pro to supply power to your BlackVue for a preset duration, from 6 hours to infinity. The timer function is only active when the vehicles ignition is off and automatically stops if ignition is on.
* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.
LOW VOLTAGE CUT-OFF SETTINGS
When vehicles ignition is off, Power Magic Pro checks your vehicles battery voltage periodically while powering your BlackVue. If power drops below the set cut-off level, Power Magic Pro automatically cuts power to the dashcam, thus saving your vehicles battery life.
POWER YOUR BLACKVUE IN PARKING MODE
with Power Magic Pro.
Rest easy, knowing that your car is being monitored while you are away.
BlackVue dashcams automatically switches to Parking Mode to monitor your parked vehicle, but only writes to the memory card when something happens (motion or impact detected), which has two benefits:
Less chance for important files to be overwritten during long Parking Mode sessions.
Extended memory card lifespan in the long run.
- Model Name Power Magic Pro
- Rated output voltage DC 12~24V Output current / Quiescent current Rated current 1A, Max. 2A / Under 200µA
- Output voltage cut-off
- (on the basis of the input) 12 ~ 12.5V (±0.1V) / 22.8 ~ 23.2V (±0.2V) Output Voltage Restoration
- (on the basis of the input) Cut-off voltage +0.2V and higher
- Output Voltage Cut-off Timer Function 6 hours ~ Infinity
- Power Magic Pro
- Wire Harness
- Fixing Screws
- Double Side Tape
You may also like
CEN Low Profile Mini Blade FuseAdd A Circuit Tap Piggy Back Fuse Holder£4.69
BTC-1A TAMPER-PROOF CASEA necessary security accessory for BlackVue dashcams£37.95 £39.95
Mini Suction Cup MountPART NUMBER: 010-12530-05£16.99
Genuine BlackVue microSD card16GB Micro SD Card£37.99 £39.99
DASHCAM MOUNT BRACKETDR900 Front Mount + 3M Tape£28.49 £29.99
BlackVue DR650S & DR750S Series CPL FilterALBV76£37.95 £39.95
BlackVue OBD Power Pro CableThe BlackVue OBD Power Pro Cable is the quickest and simplest way to power your BlackVue dash cam directly from the vehicles electrical system, without a visible cable or the complicated and time consuming task of wiring directly to the fusebox.£22.75 £23.95
REAR CAMERAfor DR750S-2CH DR900S-2CH£104.45 £109.95
BlackVue Front Mount Sticky PadFront mount double sided adhesive for DR490L Only£11.39 £11.99
POWER MAGIC BATTERY PACK (B-112)Battery Pack for Parking Mode 1-hour charge/12-hour operation Capacity 3000mA/12.8V£189.99 £199.99
HARD-WIRING POWER CABLE£23.74 £24.99
BlackVue Front & Rear Mount Sticky Pads1x Front & 1x Rear mount double sided adhesive£14.24 £14.99
Power Cable for DR750LW£28.49 £29.99
POWER MAGIC EZParking Mode has never been easier!£56.95 £59.95
CEN Micro 2 Type Blade FuseAdd A Circuit Tap Piggy Back Fuse Holder£4.69
20m EXTERNAL CAMERA WATERPROOF COAXIAL CABLE£56.99 £59.99
Mio MiVue A20 Rear Dash CamWith the dual lens capability of the MiVue 700 series and A20 rear cam fitted, you can drive safe in the knowledge that your back is covered.£59.95
DASHCAM MOUNT BRACKETDR490L Front Mount + 3M Tape£28.49 £29.99
BTC-1B TAMPER-PROOF CASEA necessary security accessory for BlackVue dashcams£37.95 £39.95