The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered. 

• Component: Woofer
• Size mm (in.): 200 (8)
• Power Handling
• 300W Peak
• 150W Continuous 
• Impedance: 4Ω 
• Frequency Response: 35-500Hz
• Magnet size D x d x h mm (in.): 48 (1.89) x 18 (0.71) x 7 (0.28)
• Weight of one speaker kg (lb.): 1,21 (2.67)
• Voice Coil Ø mm (in.): 50 (2)

• Audison Prima APBMW S8 4 ohm Subwoofer Pair