Product Details

The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.

Developed with electroacoustic parameters customized for BMW-Mini to increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box

38 mm voice coil wound on aluminium support for a considerable power dissipation and stability even during high excursions

Two 5 mm gaskets provided for OEM placements

• Component    Woofer
• Size mm (in.) 200 (8)
• Power Handling W peak W continuos 300 150
• Impedance Ω 2
• Frequency Response Hz 35 ÷ 500
• Magnet size D x d x h mm (in.) 48 (1.89) x 18 (0.71) x 7 (0.28)
• Weight of one speaker kg (lb.) 1,21 (2.67)
• Voice Coil Ø mm (in.) 50 (2)

Whats Included

• Audison Prima APBMW S8 2 ohm Subwoofer