

2 YEAR WARRANTY
Audison Prima APBMW ReAMP 2 Plug & Play Harness Replace OEM BMW Mini Ram Module
APBMW REAMP 2
BMW - MINI OEM REPLACEMENT
There are no reviews for this product.
Product Information
This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
Made for BMW and Mini
Retrieve the OEM source front and rear stereo audio signal
Plug & Play
This Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier
OEM amp outputs routing
Route the AP bit amp outputs to each of the OEM amplifier seven channels : Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre
OEM power supply
Recover the power supply of the OEM amplifier to be used with the AP bit (+ BATT and GND)
OEM remote recover
Recover the remote signal from the factory source
Specification
APBMW ReAMP 2 allows to:
- Retrieve the OEM source front and rear stereo audio signal 2. Route the AP FORZA amp outputs to each of the OEM amplifier seven channels: (Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre) The Plug&Play terminals enable the user to choose which
- AP FORZA amplifier output to connect to each of the seven channels of the OEM audio system. It is also possible to bridge the outputs of the AP FORZA amplifier.
- Keep the OEM amplifier on.
- The USS1 prevent the speaker diagnostic error of the center channel.
What's Included
- APBMW REAMP 2 Cable
You may also like

Audison Prima AP SPK Out 8.9 Speaker Output Lead for AP8.9 bit DSP Amplifier
AP SPK OUT 8.98CH OUTS CIRC. TERMINALS FEMALEAP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
£45.00 IN STOCK
Focal Inside Nissan Y-ISO T-Harness for Impulse 4.320 4 Channel Car Amplifier
Focal Inside Nissan Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits select Nissan vehicles without factory amp
£39.00 IN STOCK
Audison Prima AP T-H AVS02 T-Harness Plug & Play Audi Volkswagen bit Amplifier
AP T-H AVS02PRIMA T-HARNESS AUDI, VW 52PINT-Harness “DCC” is the Plug&Play solution for AUDI and VW with 52 pin to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
£69.00 IN STOCK
Focal Inside SPK Sim Impedance Simulator for Impulse 4.320 4 Channel Amplifier
Focal Inside SPK SimImpedance simulator for Impulse 4.320
£39.00 IN STOCK
Focal Inside 2.1 IMP Harness for Impulse 4.320 4 Channel Amplifier & PSB200 Sub
Focal Inside 2.1 IMP HarnessConnects Impulse 4.320 front speakers plus PSB200 sub
£69.00 IN STOCK
Focal Inside Renault Dacia Y-ISO T-Harness Impulse 4.320 4 Channel Amplifier
Focal Inside RENAULT/DACIA Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Renault Dacia vehicles without factory amp
£39.00 IN STOCK
Audison Prima AP SPK Out 4.9 Speaker Output Lead for AP4.9 bit DSP Amplifier
AP SPK OUT 4.98CH OUTS CIRC. TERMINALS FEMALEAP SPK OUT 4.9 cable is dedicated to the connection of the AP4.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
£27.00 IN STOCK
Audison Prima APBMW BIAMP 1 Plug & Play Harness Bi Amplifying Speakers BMW Mini
APBMW BIAMP 1BMW - MINI OEM REPLACEMENTThis Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The “T” connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
£79.00 IN STOCK
Focal Inside Ford Y-ISO T-Harness Impulse 4.320 FIT 9.660 4 Channel Amplifier
Focal Inside Ford Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Ford vehicles without factory amp
£49.00 IN STOCK
Focal Inside BMW 2.1 IMP Speaker Harness for Impulse 4.320 4 Channel Amplifier
Focal Inside 2.1 IMP HarnessBMW/IMPULSE 4.320 HARNESS
£49.00 IN STOCK
Focal Inside Toyota Y-ISO T-Harness Impulse 4.320 FIT 9.660 4 Channel Amplifier
Focal Inside TOYOTA Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Toyota vehicles without factory amp
£39.00 IN STOCK
Audison Prima APBMW ReAMP 1 Plug & Play Harness Replace OEM BMW Mini Amplifier
APBMW REAMP 1 BMW - MINI OEM REPLACEMENTThis Plug&Play harness provides the ability to replace the OEM BMW amplifier with an Audison AP bit on BMW vehicles equipped with the optional “Hi-Fi” sound system.The OEM seven-channel analog amplifier is connected via a forty-two pin multipolar connector.
£129.00 IN STOCK
Focal Inside 2.2 IMP Harness for Impulse 4.320 4 Channel Amplifier & ISUB Twin
Focal Inside 2.2 IMP HarnessConnects Impulse 4.320 front speakers plus two ISUB Twin subs
£79.00 IN STOCK
Audison Prima APBMW T-H BMW01 T-Harness Plug & Play BMW integrate bit Amplifier
AP T-H BMW01PRIMA T-HARNESS BMW
£59.00 IN STOCK
Focal Inside Volkswagen VW Y-ISO T-Harness Impulse 4.320 4 Channel Amplifier
Focal Inside VW Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Volkswagen vehicles without factory amp
£59.00 IN STOCK
Audison Prima AP 260P&P I/0 ISO Plug and Play Extension Lead In and Out
AP 260P&P I/OISO EXTENTION IN/OUT 260 CM/102 IN
£79.00 IN STOCK
Focal Inside Citroen Peugeot Y-ISO T-Harness Impulse 4.320 4 Channel Amplifier
Focal Inside PSA Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Citroën, DS Automobiles and Peugeot vehicles without factory amp
£49.00 IN STOCK
Focal Inside IMP Extension Cable I/O 150 for Impulse 4.320 4 Channel Amplifier
Focal Inside IMP Extension I/O 1505ft extension cable for Impulse 4.320 amplifier
£49.00 LOW STOCK
Audison Prima AP 160P&P IN 160cm ISO Plug & Play Extension Lead Amp Input
AP 160P&P INThe Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers
£49.00 IN STOCK