Audison Prima AP 260P&P IN 260cm ISO Plug & Play Extension Lead Amp Input
AP 260P&P IN
ISO EXTENTION INPUT 260 CM/102"
There are no reviews for this product.
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers. AP 260P&P IN sends the audio signal coming from the head unit to the AP bit amplifiers.
Built with twisted cables
For effective elimination of disturbances.
Cut-proof protective shield
For maximum ease of installation.
No soldering required
- 260cm long
- Audison Prima AP 260P&P IN
You may also like
AP T-H AVS02PRIMA T-HARNESS AUDI, VW 52PINT-Harness “DCC” is the Plug&Play solution for AUDI and VW with 52 pin to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.£69.00 IN STOCK
AP T-H BMW01PRIMA T-HARNESS BMW£59.00 IN STOCK
AP T-H AVS01PRIMA T-HARNESS AUDI, VW 40PIN£49.00 IN STOCK
APBMW REAMP 2BMW - MINI OEM REPLACEMENT£139.00 IN STOCK
APBMW BIAMP 2BMW - MINI OEM REPLACEMENT£139.00 IN STOCK
AP SPK OUT 8.98CH OUTS CIRC. TERMINALS FEMALEAP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.£44.00 IN STOCK
APBMW BIAMP 1BMW - MINI OEM REPLACEMENTThis Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The “T” connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.£79.00 LAST ONE
AP 560P&P I/OISO EXTENTION IN/OUT 560 CM / 220 IN£139.00 IN STOCK
AP 560P&P INISO EXTENTION INPUT 560 CM/220"£74.00 IN STOCK
AP T-H MBP01PRIMA T-HARNESS MB, PORSCHE£59.00 IN STOCK
AP SPK OUT 4.98CH OUTS CIRC. TERMINALS FEMALEAP SPK OUT 4.9 cable is dedicated to the connection of the AP4.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.£27.00 IN STOCK
AP SPK OUT 5.98CH OUTS CIRC. TERMINALS FEMALE£29.00 IN STOCK
APBMW REAMP 1 BMW - MINI OEM REPLACEMENTThis Plug&Play harness provides the ability to replace the OEM BMW amplifier with an Audison AP bit on BMW vehicles equipped with the optional “Hi-Fi” sound system.The OEM seven-channel analog amplifier is connected via a forty-two pin multipolar connector.£129.00 IN STOCK
AP 260P&P I/OISO EXTENTION IN/OUT 260 CM/102 IN£79.00 IN STOCK
AP 160P&P INThe Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers£49.00 IN STOCK