2 YEAR WARRANTY
Audison Prima AP 160P&P I/0 ISO Plug and Play Extension Lead In and Out
AP 160P&P IN
Save time with these new Plug & Play harness solutions
ISO EXTENTION INPUT 160 CM/63"
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers. AP 160P&P IN sends the audio signal coming from the head unit to the AP bit amplifiers.
Built with twisted cables
For effective elimination of disturbances.
Cut-proof protective shield
High flexibility
For maximum ease of installation.
No soldering required
ISO EXTENTION INPUT 160 CM/63"
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers. AP 160P&P IN sends the audio signal coming from the head unit to the AP bit amplifiers.
Built with twisted cables
For effective elimination of disturbances.
Cut-proof protective shield
High flexibility
For maximum ease of installation.
No soldering required
- 160cm long
- Audison Prima AP 160P&P IN
You may also like
Audison Prima AP 560P&P I/0 ISO Plug and Play Extension Lead In and Out
AP 560P&P I/OISO EXTENTION IN/OUT 560 CM / 220 IN
£139.00
Audison Prima AP T-H AVS02 T-Harness Plug & Play Audi Volkswagen bit Amplifier
AP T-H AVS02PRIMA T-HARNESS AUDI, VW 52PINT-Harness “DCC” is the Plug&Play solution for AUDI and VW with 52 pin to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
£69.00
Focal Inside Citroen Peugeot Y-ISO T-Harness Impulse 4.320 4 Channel Amplifier
Focal Inside PSA Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Citroën, DS Automobiles and Peugeot vehicles without factory amp
£49.00
Audison Prima APBMW BIAMP 2 Plug & Play Harness Bi Amplifying Speakers BMW Mini
APBMW BIAMP 2BMW - MINI OEM REPLACEMENT
£139.00
Audison Prima APBMW ReAMP 1 Plug & Play Harness Replace OEM BMW Mini Amplifier
APBMW REAMP 1 BMW - MINI OEM REPLACEMENTThis Plug&Play harness provides the ability to replace the OEM BMW amplifier with an Audison AP bit on BMW vehicles equipped with the optional “Hi-Fi” sound system.The OEM seven-channel analog amplifier is connected via a forty-two pin multipolar connector.
£129.00
Audison Prima AP SPK Out 4.9 Speaker Output Lead for AP4.9 bit DSP Amplifier
AP SPK OUT 4.98CH OUTS CIRC. TERMINALS FEMALEAP SPK OUT 4.9 cable is dedicated to the connection of the AP4.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
£27.00
Focal Inside 2.1 IMP Harness for Impulse 4.320 4 Channel Amplifier & PSB200 Sub
Focal Inside 2.1 IMP HarnessConnects Impulse 4.320 front speakers plus PSB200 sub
£69.00
Focal Inside IMP Extension Cable I/O 150 for Impulse 4.320 4 Channel Amplifier
Focal Inside IMP Extension I/O 1505ft extension cable for Impulse 4.320 amplifier
£49.00
Focal Inside Volkswagen VW Y-ISO T-Harness Impulse 4.320 4 Channel Amplifier
Focal Inside VW Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Volkswagen vehicles without factory amp
£59.00
Audison Prima AP 160P&P IN 160cm ISO Plug & Play Extension Lead Amp Input
AP 160P&P INThe Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers
£49.00
Audison Prima AP 260P&P IN 260cm ISO Plug & Play Extension Lead Amp Input
AP 260P&P INISO EXTENTION INPUT 260 CM/102"
£59.00
Focal Inside Nissan Y-ISO T-Harness for Impulse 4.320 4 Channel Car Amplifier
Focal Inside Nissan Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits select Nissan vehicles without factory amp
£39.00
Audison Prima APBMW BIAMP 1 Plug & Play Harness Bi Amplifying Speakers BMW Mini
APBMW BIAMP 1BMW - MINI OEM REPLACEMENTThis Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The “T” connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
£79.00
Audison Prima APBMW ReAMP 2 Plug & Play Harness Replace OEM BMW Mini Ram Module
APBMW REAMP 2BMW - MINI OEM REPLACEMENT
£139.00
Focal Inside BMW 2.1 IMP Speaker Harness for Impulse 4.320 4 Channel Amplifier
Focal Inside 2.1 IMP HarnessBMW/IMPULSE 4.320 HARNESS
£79.00
Audison Prima AP SPK Out 5.9 Speaker Output Lead for AP5.9 bit DSP Amplifier
AP SPK OUT 5.98CH OUTS CIRC. TERMINALS FEMALE
£29.00
Audison Prima AP T-H AVS01 T-Harness Plug & Play Audi Volkswagen bit Amplifier
AP T-H AVS01PRIMA T-HARNESS AUDI, VW 40PIN
£49.00
Audison Prima APBMW T-H BMW01 T-Harness Plug & Play BMW integrate bit Amplifier
AP T-H BMW01PRIMA T-HARNESS BMW
£59.00
Focal Inside Toyota Y-ISO T-Harness Impulse 4.320 FIT 9.660 4 Channel Amplifier
Focal Inside TOYOTA Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Toyota vehicles without factory amp
£39.00