Audison DRC Digital Remote Control Multimedia Display for bit One, Ten & Thesis
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAY
The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the “DRC Settings” menu can be adjusted and navigation is also possible through the “Navi Command” function if the system features an Audison bit Play HD with video output connected to a monitor.
There are no reviews for this product.
- Default Menu:
- Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Aux 1, Aux 2,
- Digital Electric, Digital Optical).
- DRC Settings:
- Keybord color, Keybord brightness, Display brightness, Discreet screen, Main
- screen logo (through the DRC MP joystick).
- DSP Memory*:
- Audison compatible products memories selection.
- DSP Settings*:
- Dynamic EQ, Bass Boost, AutoIN Level Adj.
- Player Menu**:
- bit Play HD off delay.
- Navy Command**:
- navigation of bit Play HD (through the DRC MP joystick).
- * Available only with compatible Audison products connected
- **Available only with bit Play HD connected
- DRC MP
- Cable length 4.5m/ 177"
- W x H x D (mm/inch): 87 x 36 x11 / 3.45 x 1.41 x 0.43
- DRC MP holder: W x H (mm/inch): 92 x 41 / 3.62 x 1.61
- Audison Prima: AP8.9 bit, AP5.9 bit, AP4.9 bit
- Audison bit: bit One, bit Ten, bit Ten D, bit Play HD
- Audison Thesis: TH uno, TH due, TH quattro
You may also like
MPG 300 PRO GRILLE£75.99
Perfect Alpine Installation in Your Volkswagen T5 / T6KIT-802T5£205.95
AV GR10Designed to fit VOCE AV 10 subwoofer£37.99
CBT 1 RCARCA connector making link fast and link.£47.49
Aluminium Pod MountDesigned for Audison Voce Tweeters£99.99
Aluminium Pod MountDesigned for Audison Prima Tweeters£99.99
Protect Your S-Series Speaker6 x 9" (16 x 24 cm) S-Series Speaker GrilleKTE-S69G£25.70
Audison USS4Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs.When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced.£37.99
M.O.S.T Audio Output InterfaceZen VThe ZEN-V allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle factory fit, finish or features.£599.99
Protect Your S-Series Speaker5-1/4" (13.5 cm) S-Series Speaker GrilleKTE-S50G£25.70
Protect Your S-Series Speaker6-1/2" (16.5 cm) S-Series Speaker GrilleKTE-S65G£25.70
LCQ-16 channel line out converter with eq and accubassâ„¢£332.49
Cardo Rider Hybrid & Corded MicrophonePart Number: SRAK0027£64.99
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.£47.49
Aluminium Pod MountDesigned for Hertz Mille MPK Pro Tweeters£99.99
bit DMI DIGITAL MOST INTERFACE£522.49
RBC-1Remote Bass Control£22.99
HM RGB 1 BK RGB CONTROLLER WITH RF REMOTE CONTROLThe HM RGB 1 BK enhances your experience with multicolor LED lighting that can be changed to fit your mood or craft.£104.49
ES3It prevents the processor from shutting down when turning on cars featuring the start & stop system.Â£47.49