Audison bit C20 Converts Coaxial Digital Input to a TOSLINK Digital Output
The C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).
There are no reviews for this product.
The conversion allows the integration of the new Hi-Res portable devices equipped with coaxial digital output (75Ω) and smartphones with analog output on 3.5 mm mini Jack (also 4 poles) with Audison processors featuring an optical digital input compatible with the resolution of the signal sent to the C20.
Thanks to its extreme compactness, the C20 can be installed in a hidden position on the dashboard, drastically reducing the length of the cabling between the portable player and the receiving device nullifying in this way any issues with interfacing.
The coaxial digital input is provided with an isolation transformer that improves the balance between the transmitter and the receiver circuit, reducing noise due to EMI electromagnetic interference, which is particularly insidious inside the passenger compartment.
The AUX-IN input is equipped with a pre-amplifier with adjustable gain of 0.1V ÷ 2V for an optimal coupling with each device before the Analog-Digital conversion is performed by a high quality converter at a resolution of 24 bit/48 kHz.
For maximum ease of use in cars, the C2O independently selects the input with priority assigned to the AUX-IN. With the default setting, after 6 seconds of no analog signal, the C2O moves to the coaxial digital input. An internal switch allows for the time before the switch to be set to 9 or 12 seconds.
Full DA HD
Pure digital signal transfer with a resolution up to 24 bit / 96 kHz
According to the definition of HiRes audio provided by JAS (Japan Audio Society - jas-audio.or.jp), C2O achieves the 24 bit / 96 kHz digital to analog conversion processing requirement.
- Voltage: 6 ÷ 30 VDC
- Idling current: 70 mA @ 12V
- Remote IN voltage: 3 VDC (0.5 mA)
- + 12 Remote IN voltage: 6 VDC (80 mA)
- Distortion THD (analog input): 0,002 %
- Bandwidth (analog input): 5 ÷ 24 kHz
- S/N ratio @ A weighted (analog input): 105 dB
- Input sensitivity (analog input): 0.1 ÷ 2 VRMS
- Analog Pre-IN: 3.5mm jack stereo 3/4 pole
- Digital S/PDIF: Electrical coax (24 bit 192 kHz)
- Signal priority: Analog
- Digital IN delay switch: 6 - 9 - 12 sec. (default 6 sec.)
- Optical digital:
- From analog input: 24 bit 48 kHz
- From digital input: 24 bit 192 kHz
- W x H x D mm / In. 69 x 26 x 54,5 / 2.71 x 1. 02 x 2.14
- Weight kg / lbs: 0,048 / 0.106
- Audison C20
You may also like
ACR-1Dash Remote£44.95 IN STOCK
PIC 6PRE IN CONNECTOR 6£37.99 IN STOCK
HELIX DSP.3Digital 8 channel signal processor with 48 kHz / 24 Bit signal path£399.99 IN STOCK
AC-LGDload generating device & signal stabiliser£47.49 IN STOCK
VXi-BTCJLid™ Bluetooth® Communicator for VXi Amplifiers£119.99 OUT OF STOCK
SFCAudison Sampling Frequency Converter£151.99 IN STOCK
HELIX V TWELVE DSP12 Channel amplifier with integrated 14-channel DSP 8 x 75 / 150 Watts @ 4 Ohms£1,274.99 IN STOCK
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.£47.49 IN STOCK
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the “DRC Settings” menu can be adjusted and navigation is also possible through the “Navi Command” function if the system features an Audison bit Play HD with video output connected to a monitor.£142.49 IN STOCK
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, Rubber Touch£151.99 IN STOCK
Audison USS4Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs.When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced.£37.99 IN STOCK
HD-RLCAmplifier Remote Level Control and Cable£29.99 IN STOCK
Remote Bass KnobRUX-KNOB2£41.15 OUT OF STOCK
DIRECTOR - Display Remote ControlUniversal Remote Control with Touchscreen£249.99 IN STOCK
STASTA Female to Female Optical Cable Adapter£28.49 IN STOCK
AudioControl AC-BT24Bluetooth® adapter for an AudioControl DSP deviceThe AC-BT24 enables high definition Bluetooth® audio streaming (aptX HD support) and programming for AudioControl DSP products featuring the Option Port. Stream hires audio directly to the DM-810 and DM-608 DSP or the D-6.1200 DSP amplifier and program the DSP simultaneously.£199.99 IN STOCK
ACP 66 RCA ADAPTER CABLE£56.99 IN STOCK
ECKDRC Cable Extension kit for installations on especially long vehicles.£23.74 IN STOCK
DRC-205Digital Remote Control for JLid™ compatible products£89.99 IN STOCK
Voce AV bit IN HDDigital interface for all AV amplifiers. It offers one AD Link and AC Link input as well as one AD Link and AC Link output for a perfect digital connection with digital processors (bit one and bit Ten D) to drive a multi-amplified system.£170.99 IN STOCK