Audiotec Fischer Conductor Remote Control for Brax Match Helix Amplifier DSP
The CONDUCTOR combines design and functionality in perfection.
There are no reviews for this product.
One-touch remote control
The CONDUCTOR combines design and functionality in perfection. With just one knob you have all important functions of your (DSPs) sound system fully under control – from volume adjustment, signal source selection and setup change up to the control of an optional Bluetooth module.
Tailor-made for your needs
The CONDUCTOR can always be optimally adapted to your needs – whether as a simple subwoofer remote or as a control unit for complex system configurations. For example, two playback zones with different volumes: music for the parents in the front and a radio play for the children in the back.
All signal sources under control
With the CONDUCTOR you can manage all your connected signal sources in no time at all. For example, use your smartphone as a digital media source and intuitively control its playback (play / pause, track forward / back) and volume in combination with the optional Bluetooth Extension Card.
Sound Setup switch according to your music taste
Manage different optimized sound setups of your DSP for rock, pop, classic or absolute pure sound and enjoy your music always with optimal sound quality.
Thanks to its compact, fully symmetrical design and high-quality materials, the CONDUCTOR can be integrated almost seamlessly into the existing vehicle interior and blends in with its appearance as inconspicuously as an original part.
- Up to 4 individual volume menus configurable (Master, Digital, HEC/AUX, Subwoofer, Rear Attenuation)
- Volume range selectable (60 dB, 24 dB, 12 dB)
- Volume steps selectable (1 dB steps, 0.5 dB steps)
- Individual color for each volume menu configurable
- Sound Setup selection between all 10 memory slots
- Intuitive Bluetooth playback control and pairing activation (only in combination with an optional Bluetooth Extension Card)
- 12 x RGB-LEDs for visual feedback
- Wide color space with over 16 million colors
- Brightness and automatic dimming function configurable
- Easy installation
- Flush mount installation with Ø 40 mm hole cut-out
- 5 m cable harness with split connector and single connector supply
- Optional housing for on-dash installation available soon
- Full configuration and updatability through the DSP PC-Tool software
- Housing ABS housing with machined aluminum knob
- Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processorr
- Connection Single connector supply through MiniDIN or NanoFit
- Cable length
- 5 m total length – split into 4.8 m connection cable + 0.2 m CONDUCTOR cable
- Dimensions (Ø x H)
- Ø 46 x 28.7 mm / Ø 1.81 x 1.13”
- Installation depth
- 17 mm / 0.67"
- DSP PC-Tool 4.75a or higher
- BRAX DSP
- HELIX DSP ULTRA
- DSP MINI
- V TWELVE DSP
- V EIGHT DSP MK2
- M FOUR DSP
- M 5DSP MK2
Note: The CONDUCTOR is not compatible with the WIFI CONTROL or the DIRECTOR.
- Remote control CONDUCTOR
- 4.80 m connection cable
You may also like
Hertz HRCSub Level Controller£34.99 ✓IN STOCK
HELIX DSP ULTRADigital 12 channel signal processor with 96 kHz /32 Bit signal path£1,179.99 ✓IN STOCK
Audison VCRA Voce & SR£49.99 ✓IN STOCK
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus.£149.99 ✓IN STOCK
STASTA Female to Female Optical Cable Adapter£29.99 ✓IN STOCK
ACR-2Dash Remote£49.99 ✓IN STOCK
HELIX V TWELVE DSP12 Channel amplifier with integrated 14-channel DSP 8 x 75 / 150 Watts @ 4 Ohms£1,274.99 ✓IN STOCK
HELIX SDMI25 MOST25Simply clever – the HELIX SDMI25 is the “smartest solution” to integrate DSP products into vehicles with premium sound system.£349.99 ✓IN STOCK
DRC-100Digital Remote Control for JLid™ compatible products£69.99 ✓IN STOCK
ES3BIT ENERGY STORAGE START & STOPIt prevents the processor from shutting down when turning on cars featuring the start & stop system.£49.99 ✓IN STOCK
CL-RLCRemote Level Control / Line Driver£89.99 ✓IN STOCK
ACR-3Dash Remote£49.99 ✓IN STOCK
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.£49.99 ✓IN STOCK
CXARC RemoteCX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.£29.99 ✓IN STOCK
APL 2AP4 D - AP1 D LINK CABLE£29.99 ✓IN STOCK
JL Audio MBT-RXMarine-rated Bluetooth® adapter£49.99 ✓IN STOCK
ECKDRC Cable Extension kit for installations on especially long vehicles.£24.99 ✓IN STOCK
VXi-BTCJLid™ Bluetooth® Communicator for VXi Amplifiers for control, not streaming£119.99 ✓IN STOCK
C2OCOAX TO OPTICALThe C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).£119.99 ✓IN STOCK
HD-RLCAmplifier Remote Level Control and Cable£29.99 ✓IN STOCK