2 YEAR WARRANTY
AudioControl AC-LGD Pair of Dummy Load Generating Device & Signal Stabiliser
AC-LGD
load generating device & signal stabiliser
Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilise signal from the factory system to ensure the best possible audio.
The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections.
Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilise signal from the factory system to ensure the best possible audio.
The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections.
- Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H
- Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H
- Weight (single LGD): 1.4oz (39g)
- One pair of Load Generating Devices (LGDs)
You may also like
Audison Prima ACP 6 Amplifier Low Level Input RCA AUX Lead for Prima AP8.9
ACP 66 RCA ADAPTER CABLE
£59.00
Audison DRC MP Digital Remote Control & Display for Prima bit DSP Amplifiers
DRC MP DIGITAL REMOTE CONTROL - MULTIMEDIA PLAYThe new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, Rubber Touch
£159.00
Audison bit C20 Converts Coaxial Digital Input to a TOSLINK Digital Output
C2OCOAX TO OPTICALThe C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).
£129.00
Audison VCRA Remote Sub Level Control for Voce AV5.1K, Uno, SR 5, SR1D & SR 1DK
Audison VCRA Voce & SR
£49.00
Audison DRC AB Digital Remote Control & Display for Prima bit DSP Amplifiers
DRC AB DIGITAL REMOTE CONTROL Multimedia DisplayDRC AB enables the main system control (volume, balance, fader and subwoofer volume, bass-boost) without the use of a PC.
£89.00
Kicker CXARC Remote Bass Control for CX, DX, PX and KEY500.1 Series Amplifiers
CXARC RemoteCX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
£30.00
AudioControl ACR-3 Remote Level Control for LC8i DQ-61 Epicenter Amplifiers
ACR-3Dash Remote
£50.00
Audiotec Fischer Conductor Remote Control for Brax Match Helix Amplifier DSP
CONDUCTORThe CONDUCTOR combines design and functionality in perfection.
£109.00
Audison Prima ACP 2 Amplifier Low Level Input RCA AUX Lead for Prima AP8.9
ACP 22 RCA ADAPTER CABLE
£39.00
Audison Prima AP H ASD Bypass Plug & Play BMW Harness for MOST/HK OEM Amplifiers
AP H ASD BYPASSBMW HARNESS
£39.00
Audison Prima ASP Signal Presence Module for Prima AP8.9bit AP5.9bit AP4.9bit
ASP Signal PresenceASP is indispensable when installing AP8.9 bit with some OEM sources requiring, only at the initial turn-on instant, a resistive load impedance at the outputs to detect the speakers presence.In case there is no load, the source disables the outputs, usually only for the Rear section.
£59.00
JL Audio VXi-HUB JLid Comm & Optical Audio Network Hub for VXi Amps Amplifiers
VXi-HUBJLid™ Comm & Optical Audio Network Hub for VXi Amplifiers
£159.00
JL Audio MBT-RX Car Marine Bluetooth Wireless Receiver for Amplifiers RCA AUX In
JL Audio MBT-RXMarine-rated Bluetooth® adapter
£55.00
AudioControl ACR-2 Remote Level Control for LCQ-1 LC7 DQL-8 Epicenter Plus EQ
ACR-2Dash Remote
£50.00
JL Audio DRC-205 Digital Remote Control for JLid FiX TwK & VXi-Series Amplifiers
DRC-205Digital Remote Control for JLid™ compatible products
£109.00
Audison VCR-S1 Sub Bass Volume Remote Control for SR 1.500 & SR 5.600 Amplifiers
VCR-S1SUB VOLUME REMOTE CONTROL
£49.00
Audison CBT 1 RCA bit Ten & bit Ten D RCA Connector Adapter Cable
CBT 1 RCARCA connector making link fast and link.
£59.00
Audison B-CON Hi-Res Audio Wireless Bluetooth 5.0 Receiver Interface 24bit 96kHz
B-CON HI-RES BLUETOOTH RECEIVERThe Audison B-CON is the only Bluetooth 5.0® receiver designed for automotive use that has obtained the “Hi-Res audio wireless” certification from JAS (Japan Audio Society)
£199.00
JL Audio RBC-1 Remote Bass Level Control for JD JX MX RD Series Amps Amplifiers
RBC-1Amplifier Remote Level Control and Cable
£28.00
Match MEC Optical Input Module SPDIF Automatic Signal Detection for PP 62DSP
MATCH MEC OPTICAL INThe MATCH Extension Card BT extends MATCH devices with a Bluetooth® Audio Streaming function and an optical digital output in SPDIF format.
£83.00