Alpine PDX-F6 Class D 4 3 or 2 Channel Digital Power Amplifier Amp 600w RMS

Alpine PDX-F6 Class D 4 3 or 2 Channel Digital Power Amplifier Amp 600w RMS

4/3/2 Channel Power Density Digital Amplifier

PDX-F6

Meet the New Amplifier Benchmark


“1-year-warranty"free-dpd-delivery1556968630966.jpg

£0.00
£494.95
RRP: £599.99

There are no reviews for this product.

Earn 0 reward points 8205

Product Details

The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised.

Ultra-Wide Frequency Response

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB)

Total Harmonic Distortion Rate (THD) vs. Frequency

The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for high frequency reproduction. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, and PDX-F4 are synonymous with extremely high frequency reproduction. The THD is actually falling at high frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortions. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power.

Signal to Noise

These amps are capable of unheard of S/N ratio up to 95dB S/N @ 1W, 122dB S/N at rated power for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX amps deliver crystal clear music every time.

Damping Factor

With ultra-low output impedance, the new PDX offers extremely controlled, tight bass for unprecedented sound quality. Ratings are >1000 for Mono and >500 for 4ch.

Power Output to the Extreme

Beefed up Power

The PDX power supply delivers tremendous headroom with low distortion and noise. PDX amplifiers have an extremely high total system efficiency of ~80% (power supply is rated at >90%, output stage is rated >90%).

Whats Included

  • PDX-F6

Specification

  • Connectors: Quick Disconnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4/3/2 Channel
  • Thermal Protection
  • Low-battery Protection
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Circuit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Crossover: Adjustable High Pass, Low Pass
  • Pre-Amp Stage: Discrete
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable
  • RMS Power Ratings
  • Per channel into 4 Ohms: (@14.4V ≤1%THD+N) 150W x 4
  • Per channel into 2 Ohms: (@14.4V ≤1%THD+N) 150W x 4
  • Bridged 4 Ohms: Bridged into 4Ω 300 W x 2 (≤1%THD+N)
  • Sound Tuning
  • Crossover: Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity: 0.2V to 4.0V (For Rated Power)
  • Cable size: 25 mm² (BATT and GND), 4 mm² (Remote), Up to 10 mm² (Speaker)
  • Frequency Response: 5 Hz - 100 kHz / 0dB ~ -3dB (Reference: 1 W into 4 Ω)
  • Speaker Impedance: 4 or 2 Ω
  • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 96 dBA

Leave a review